Cờ Lê Lực Thay Đầu Manoskop® Stahlwille 50181102 730N Lực 4–20 N·m

Torque wrench Service MANOSKOP® with receptacle for insert tools No. 730N

(Cần Siết Lực MANOSKOP® Stahlwille 730N)

• Để sử dụng cần trang bị thêm đầu 1/4" size 9x12mm của bất cứ hãng/ thương hiệu nào. Khuyên dùng Stahlwille 1/4" Mã số 58253004

• Thiết kế cần siết lực KHÔNG LÒ XO, không cần xả lực về 0 khi không sử dụng. Cần siết lực bền bỉ và ít sai lệch số đo

• fast, accurate setting thanks to QuickSelect quick-action adjuster
• dual stop signal
• easy-to-read double scale with colour coding to differentiate between N·m/ft·lb and ft·lb/in·lb scales
• the measuring element is only under load while force is being applied, no need for manual reset to zero
• any force applied to the tool after the 'click' or applied in the opposite direction to the current function – e.g. forcible loosening of a jammed screw -does not act on the trigger mechanism and cannot cause damage to it
• two-component handle with ergonomically designed green softer layers (resistant to oils, grease, fuels, brake fluids and Skydrol)
• calibration using perfectControl calibrating unit No 7794 or calibration system No 7706. Adjustment without disassembly.
• with certificate

• supplied in textile bag (from size 65)

• registered design

• mount for interchangeable insert tools
• QuickRelease safety lock
• can be applied for either clockwise or anticlockwise tightening by turning the inserts over
• display deviation value ± 3% (size 2; a/2 4 %)

Technical Information: